Home > Exhibition > Content
Safety recommendations when using hook and loop disc
Nov 29, 2017

Pls attention, when you use the hook and loop disc, you must observe the following rules

  1. The maximum circumferential speed is 32m/s. The RPM is 5300 for 115mm and 4850 for 125mm.

  2. For safety reasons, it must always remain within the specified maximum speed.

  3. The hook and loop disc should be totaly attached in the middle of the sanding machine.

  4. Please wear safety glasses。

  5. Please wear respirator。

  6. Please wear protective earplugs。

  7. Please read the instructions

  8. hook and loop disc.jpg

Related Industry Knowledge